Auto
Automotive repair facilities generate a variety of wastes that may be hazardous.
AEROSOL CANS
Aerosol cans (brake cleaner, carburetor cleaner, etc.) that are not completely empty may designate as hazardous waste. Empty cans can be disposed of as a solid waste or scrap metal.
CLEAN UP AND PREVENT SPILLS OR LEAKS
Use drip pans and ground cloths under vehicles. Drain and recycle fluids from leaking vehicles as soon as possible. Train employees on spill prevention and response procedures. Keep a fully stocked spill kit accessible.
CLEANING AUTO PARTS
Arrange drip pans, drying racks, and drain boards so the fluids are directed into a holding tank. Recycle used solutions through a licensed hazardous waste hauler.
DISPOSE OF WASTE PROPERLY
Recycle oil, oil filters, and antifreeze. Never mix hazardous wastes, and label all hazardous materials clearly. Use a licensed hazardous waste vendor or self-haul to the Hazardous Waste Drop-Off Station.
BRAKE FLUID
Because brake fluid is not crude-based, it shouldn't be added to used oil. Due to toxicity, brake fluid is typically hazardous. It also becomes hazardous when contaminated with chlorinated solvents from spray can brake cleaner.
PARTS WASHER (SOLVENTS)
Used parts washer solvents often become dangerous waste. The solvent itself can often be recycled but likely must be managed as dangerous waste.
SPENT ANTIFREEZE
Antifreeze may contain a toxic substance called ethylene glycol. Drain spent antifreeze from radiators and heater cores promptly to prevent spills. If spent antifreeze is recycled, it does not need to be counted as a hazardous waste.
USED OIL
Do not mix oil with other waste. Your business can either hire a hazardous waste vendor, self-haul to the Hazardous Waste Drop-Off Station, or burn onsite in an appropriate furnace.
OIL FILTERS
Used oil filters can be processed to recycle both the used oil and steel remains. To drain, puncture the top of the filter, turn upside down for 24 hours into a suitable container, or crush the filter to force the oil and sludge out. Properly drained oil filters can be recycled as scrap metal.
OPERATE A CLEAN, DRY SHOP AND DUMPSTER AREA
Sweep, mop or vacuum instead of hosing down garage floors or outdoor work areas. Keep dumpster areas clean and the lids closed. Do not fill dumpsters with liquid waste or hose them out.
PROTECT OUTDOOR WORK AND STORAGE AREAS
Cover equipment, materials, and work or storage areas. All hazardous waste stored outside must be stored undercover and in secondary containment.
SHOP TOWELS
If your towels are being laundered by a vendor, they do not need to be managed and counted as a hazardous waste. If your towels are being disposed of, they are considered hazardous waste if they fail hazardous waste tests (ignitable, toxic, etc.) or have solvents on them.
Auto body shops regularly generate dangerous wastes that are harmful to human health and the environment.
Paint
Waste paint is hazardous because it is listed ignitable, toxic, or contains heavy metals. Mix only what you will use and consider switching to water-based paints.
Wash water
Wash water may contain heavy metals or grease from other auto body shop activities. Don’t let floor cleaning waste water go to an outside or inside stormdrain, dry well, or septic system.
Thinners & Solvents
Thinners and solvents used in paint preparation, painting, spray guns, or cleanup are usually dangerous because they are ignitable or designate as listed waste. Use solvent until it loses its cleaning effectiveness.
Spray gun waste
Clean equipment immediately, before waste builds up and hardens. Don’t use fresh solvent to clean guns. Use recycled waste thinners and reuse gun wash solvents.
Aerosol cans
Aerosol cans (brake cleaner, carburetor cleaner, etc.) that are not completely empty may designate as hazardous waste. Empty cans can be disposed of as a solid waste or scrap metal.
Aerosol Cans
Aerosol spray cans can be disposed of/recycled through solid waste if they are emptied and without propellant or product. Otherwise, the business should locate the appropriate hazardous waste facility in their area for disposal.
In Snohomish County, hazardous waste can be taken to the Household Hazardous Waste Drop-Off Station.
Solvents
Like with aerosol spray cans, solvents can be disposed of/recycled through solid waste if they are emptied and without liquid. Otherwise, the business should locate the appropriate hazardous waste facility in their area for disposal. DO NOT pour excess unwanted solvents down the drain.
Wash Water
Water entering storm drains goes directly through pipes to local waterways. Dirty car wash water often contains oil, grease, and toxic metals. Soapy water and the chemicals in many detergents are harmful to fish and other aquatic life. Wash water should be recycled through a closed loop system or discharged to a sanitary sewer after obtaining the proper permitting from your local sewer authorities.
Spill Response
Spill kits, spill plans, and site maps should be posted or placed in accessible areas, close to any outdoor loading or workspaces, or areas where spills are most likely to occur. Employees should be trained on the spill plan and on how to use the contents of the spill kit.
Outdoor Work and Storage Areas
Cover equipment, materials, and work or storage areas. All hazardous waste stored outside must be stored undercover and in secondary containment.
Shop Towels
If your towels are being laundered by a vendor, they do not need to be managed and counted as a hazardous waste. If your towels are being disposed of, they are considered hazardous waste if they fail hazardous waste tests (ignitable, toxic, etc.) or have solvents on them.
-
Safe Environments
Physical Address
3020 Rucker Avenue
Suite 104
Everett, WA 98201
Phone: 425-339-5250
Hours
Regular hours:
Monday through Friday
8 a.m. to 3:45 p.m.
Please arrive no later than 3:30 p.m.